Custom straps and webbing

The strap that finishes your product, sewn to spec.

Most straps are one small part of something bigger: the pull on a trailer door, the strap on a cargo container, the harness on a pack. Midwest Textile makes that part, in any length, width, color and hardware, sewn to your drawing in Green Bay, Wisconsin and shipped ready to go onto your product.

Request a quote Schedule a consultation

USA manufacturedProduction-ready first articles100 to 100,000+ units

Custom webbing straps

Straps for doors, cargo, packs and equipment.

You build the container, the cover, the case or the machine. We build the strap that goes on it, at the length, width, hole spacing and color your design calls for, then ship it to your line for final assembly.

Black webbing pull-down strap with molded end tab

01 / 06 Pull-Down Straps Webbing pulls for roll-up truck and trailer doors, with sewn loops and molded or sewn end tabs.

Black hook and loop strap with yellow bar-tack stitching and slide buckle

02 / 06 Hook and Loop Straps Hook and loop sewn to webbing, with slides, buckles or D-rings, for cable, equipment and accessory retention.

Red heavy-duty webbing strap with reinforced sewn loops

03 / 06 Tie Down and Heavy Webbing Straps Wide, heavy webbing with reinforced sewn eyes and abrasion sleeves, for securing loads and equipment in transit.

Padded camo shoulder straps with load lifters and sternum strap

04 / 06 Shoulder Straps Padded, contoured, load-bearing shoulder straps with load lifters and sternum straps. The hardest strap to make well domestically.

Padded black harness with red stitching and side-release buckles

05 / 06 Harnesses Custom harnesses with padded yokes, adjusters and side-release buckles, built for packs, tools and equipment carry.

Black folded webbing lifting straps with white stitching

06 / 06 Folded Webbing Straps Webbing folded and stitched for grip and strength, from lifting-style straps to carry handles.

Custom webbingCut to lengthPunched holes and grommetsRivets and hardwareHook and loopBar-tack stitchingColor matching Custom webbingCut to lengthPunched holes and grommetsRivets and hardwareHook and loopBar-tack stitchingColor matching

Close-up of padded shoulder strap stitching and sternum strap hardware

OEM strap manufacturer

Any length, any width, any hardware.

Most of our strap work is a component of another company's product. We cut, sew and fit hardware to your drawing in one facility, so every strap in the run matches the sample you approved.

Cargo container straps color coded by carrier, so every handler knows whose unit is whose at a glance, are a typical job.

Made in Green Bay, Built in the USA

The floor

Manufacturing in Green Bay, Wisconsin.

You work directly with the people designing, sewing and shipping your product. No agency in the middle, and no overseas shipping cycle sitting between a change request and a corrected sample.

That is why a first article turns around in a few weeks, and why a design question gets answered by the person who will actually sew it.

100 to 10,000+Units per production run

100%USA manufactured

What we do

Custom strap capabilities.

Pull-down and door straps

Webbing pulls for roll-up truck, trailer and container doors, with sewn loops and molded or sewn end tabs.

Hook and loop straps

Custom hook and loop straps with slides, buckles or D-rings, for cable management, equipment and accessory retention.

Tie down and cargo straps

Industrial straps with sewn eyes, abrasion sleeves and hardware for securing loads, covers and equipment.

Shoulder straps and harnesses

Padded, contoured, load-bearing straps and custom harnesses for packs, tools and equipment carry.

Holes, grommets, rivets and hardware

Punched holes and grommets at your spacing, rivets, buckles, slides, D-rings, snaps and hooks, fitted before the strap leaves the floor.

Production at scale

From pilot quantities of around 100 units through to orders of 100,000 and above, on the same specification.

Why Big Brands Trust Midwest

Skip the Middleman

We are the manufacturer, which means you work directly with the people designing, sewing, and shipping your industrial textile products. Expect faster answers, smarter solutions, and real collaboration with no lost-in-translation delays.

Quick First Runs for Production

We specialize in production-ready first articles that help you validate designs and move into full runs with confidence. From protective equipment covers to seat upholstery and zipper pouches, every prototype is engineered for manufacturability and durability.

Scalable Production

Whether it’s a pilot run of 100 sewn lid organizers or an order of 100,000+ OEM soft goods, we deliver with precision. Our USA-based setup gives you the flexibility to scale quickly, without overseas delays or quality risks.

Regulatory Know-How

We work with your compliance and QA teams from day one

Custom Strap Questions, Answered

The questions OEMs and product manufacturers ask us most often before a first article. If yours is not here, ask it directly.

Do you make straps for other manufacturers?

Yes. Most of our strap work is a component of another company's product: the pull on a trailer door, the strap on a cargo container, the harness on a pack. We sew to your drawing and ship to your line, and you assemble the strap into your finished product.

What webbing do you use for custom straps?

Nylon, polyester and polypropylene. Nylon is strong with some stretch, polyester holds its length and resists UV, and polypropylene is light and low cost. We choose by load, environment and how the strap is handled, in stock and custom colors.

Can you add hardware, holes and hook and loop?

Yes: buckles, slides, D-rings, hooks, snaps, grommets, rivets, punched holes at your spacing, and hook and loop sewn to the webbing. Every load point gets bar-tack or box-X stitching.

Do you make Berry compliant straps?

Yes, with Berry compliant webbing and hardware. Tell us at the quote stage, because it determines how materials are sourced. More on our military contract sewing work.

What is the minimum order quantity for custom straps?

We run from pilot quantities of around 100 units through to orders of 100,000 and above, with a first article checked against your spec before the full run.

Where are the straps manufactured?

In our own facility in Green Bay, Wisconsin. You work directly with the people cutting, sewing and shipping your straps, so a change request is answered in days rather than across an overseas shipping cycle.

What Our Industrial Partners Say

Real feedback from automotive manufacturers, industrial companies, and OEM partners who trust Midwest for their critical applications

"Midwest's seat covers helped us reduce manufacturing costs by 28% while improving comfort ratings across our entire truck line."

Manufacturing Director, Major Truck Manufacturer

"The custom cargo management systems have revolutionized our fleet operations. Loading times reduced by 40%."

Fleet Operations Manager, Logistics Company

"Quality is exceptional and TS 16949 compliance was seamless. We've scaled from 100 to 1,000 units monthly with zero quality issues."

Quality Manager, Automotive Tier 1 Supplier